User's Manual

CE910-DUAL Hardware User Guide
1vv0301010 Rev .0 – 2012-07-10
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 56 of 63
12.8. Debug in production
To test and debug the mounting of CE910-DUAL, we strongly recommend foreseeing test
pads on the host PCB, in order to check the connection between the CE910-DUAL itself and
the application and to test the performance of the module connecting it with an external
computer. Depending on the customer application, these pads include, but are not limited to
the following signals:
TXD
RXD
ON/OFF
RESET
GND
VBATT
PWRMON