User's Manual

CE910-DUAL Hardware User Guide

1vv0301010 Rev .0 – 2012-07-10

2. To drive the ON_OFF* pad directly with an ON/OFF button:

4.2. Turning off the CE910-DUAL module

Turning off the device can be done in two ways:

 By software command (see CE910-DUAL Software User Guide)

 By hardware shutdown

When the device is shut down by software command or by hardware shutdown, it issues a

detach request to the network that informs the network that the device will no longer be

reachable.

NOTE:

In order to avoid a back powering effect it is recommended to avoid having any HIGH logic

level signal applied to the digital pins of the CE910-DUAL when the module is powered OFF

or during an ON/OFF transition.