User's Manual

CE910-DUAL Hardware User Guide
1vv0301010 Rev .0 – 2012-07-10
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 12 of 63
2.2. Product Specifications
CE910-DUAL Specifications
Air Interface
CDMA 1xRTT
Frequency Bands
800/1900MHz
Data Service
CDMA 1xRTT: 153.6 Kbps (full-duplex)
Max. RF out power
 CDMA BC0: Power class 3 (24.5dBm) for 1xRTT
 CDMA BC1: Power class 2 (24.5dBm) for 1xRTT
Typical conducted sensitivity
 CDMA BC0: Better than –108dBm
 CDMA BC1: Better than –107dBm
Device dimensions
28.2mm(L) x 28.2mm(W) x 2.4mm(T) : 2 shields
* 2.05mm(T)(1 shield) version is coming soon
Weight
4.7g (2 shields)
Operational temperature
 –30 ~ +60°C: The module is fully functional(*) in the
entire temperature range and fully meets the 3GPP2
specifications.
 –30 ~ +85°C: The module is fully functional(*) in the
entire temperature range. Behavior outside the range of
–30 ~ +60°C might deviate from 3GPP2 specification.
(*)Functional: the module is able to make and receive voice
calls, data calls, and SMS.
Storage temperature
–40 ~ +85°C
Operating voltage
3.4 ~ 4.2V
IO voltage
1.8V
Interface
 144 Land-Grid-Array interface
 10 general I/O ports maximum including multi-
functional I/Os
 State LED output
 1 A/D converter
 Full RS232 CMOS UART: baud rate up to 4Mbps
 Reserved two wires CMOS UART for debugging
 USB 2.0: baud rate up to 12Mbps
Antenna
Primary antenna, 800/1900MHz