User's Manual

GS10/GS15, Operation 35
3.1.3 Configuring the Instrument
Description The instrument can be set up as real-time rover or as real-time base by pressing the
function button.
)
Turn on the instrument before pressing the function button. Refer to "Turn
on GS10/GS15".
Switching to a
real-time rover
Switching to a
real-time base
Function button IF the is THEN
Press and hold
button for < 1 s
GS in base mode The GS GNSS instrument switches to be
in rover mode.
Function button IF the is THEN
Pressing for < 1 s GS in rover mode
and in static
mode
The GS GNSS instrument switches to be
in base mode and takes the most
recent computed position (the average
of all static positions).
in rover mode
and in kine-
matic mode
The GS GNSS instrument switches to be
in base mode.