User's Manual

GS10/GS15, Operation 27
Step Description
1. Start the PC.
2. Plug the GEV234 cable into Port P1 of the instrument (GS10/GS15).
)
Ensure that the instrument (GS10/GS15) is turned off.
3. Plug the GEV234 cable into the USB port of the PC.
)
If the instrument is already turned on, the new hardware wizard
starts up automatically. Click Cancel to quit the new hardware
wizard if it starts.
4. Insert the Leica Viva Series DVD.
5. Run the SetupGS.exe to install the drivers necessary for your instrument.
6. The Welcome to InstallShield Wizard for Remote NDIS based LGS
device connection window appears.
7. Turn on the instrument.
8. Next>.
9. The Ready to Install the Program window appears.
10. Install. The drivers will be installed on your PC.
11. The InstallShield Wizard Completed window appears.
12. Click Finish to exit the wizard.