User's Manual

Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 57 of 73
Field Size Valid Range Description Default
Timeout 1 1-255 GW waits timeout seconds N/A
Add BT host response
Status Address Name
Field Size Valid Range Description Default
Status 2 0x0001-0x0003 Result of the command N/A
Address 6 Host address N/A
Name 30 String Host name N/A
4.3.4.35 Reset BT host
Delete actual BT host (only C1).
OPCODE:0x0023
Where field parameters is:
No parameter
Reset BT host response
Status
Field
Size
Valid Range
Description
Default
Status 2 0x0001-0x0003 Result of the command N/A
4.3.4.36 Set GPRS host parameters
Set parameters for control interface on GPRS (only C2). This command is not available when GPRS
interface is active.
OPCODE: 0x0024
Where field parameters is:
Host
GPRS
Host
port
No parameter is mandatory.