User's Manual

Field size Valid Range Description Default
Status 2 0x0001-0x0003 Result of the command N/A
4.3.4.8 Set BT parameters
Set BT parameters (only for C1). This command is not available when BT interface is active.
OPCODE:0x0008
Where field parameters is:
Old PIN code New PIN code Local name
If a new PIN has to be set, old and new PIN codes are mandatory.
Field size Valid Range Description Default
Old PIN 30 String Current BT PIN code 1234
New PIN 30 String New BT PIN code to be set N/A
Local name 30 String Name of the local BT device SWSGW_serial
Number
Set BT parameters response
Field
size
Valid Range
Description
Default
Status 2 0x0001-0x0003 or 0x0005 Result of the command N/A
4.3.4.9 Get Battery level
Read the battery level (percentage).
In C1 configuration, during the first battery charging or if battery has been just plugged,
gateway should be on until battery is fully charged.
OPCODE:0x0009
Status
Status