Manualshelf

User's Manual

ManualsBrandsTelit Communications ManualsElectronicsGateway Bluetooth – 802.15.4
21222324252627282930
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 24 of 73
TABLE 11 – ARM LED indicator
3.4.8.3 Short Range LED indicator
The red LED shows information on the network service availability and call status.
LED STATUS
DEVICE STATUS
Permanently OFF
Blinking
OFF
Comm. Session
Permanently ON Wake-up Session
TABLE 12 – SR LED indicator
3.4.9 Push Buttons
In the box of GG864-2.4 there are two holes to push with a sharp object the two buttons inside:
•
Reset Button: is connected to the reset signal of the ARM processor. Pushing this button
force the reset and make the BOOT of the processor.
•
Wake-Up Button: is connected to the wake-up signals of the ARM processor. Pushing this
button wake-up the processor from a power mode state.
Figure 12 - Push Buttons