User Manual

GE863-PRO
3
Hardware User Guide
1vv0300773a Rev. 1 DRAFT - 24/04/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 80 of 82
12 Conformity Assessment Issues
The GE863-PRO3 module is assessed to be conform to the R&TTE Directive as stand-alone product,
so If the module is installed in conformance with Telit installation instructions it will require no further
evaluation under Article 3.2 of the R&TTE Directive and do not require further involvement of a R&TTE
Directive Notified Body for the final product.
In all other cases, or if the manufacturer of the final product is in doubt then the equipment integrating
the radio module must be assessed against Article 3.2 of the R&TTE Directive.
In all cases assessment of the final product must be made against the Essential requirements of the
R&TTE Directive Articles 3.1(a) and (b), safety and EMC respectively, and any relevant Article 3.3
requirements.
The GE863-PRO3 module is conform with the following European Union Directives:
• R&TTE Directive 1999/5/EC (Radio Equipment & Telecommunications Terminal Equipments)
• Low Voltage Directive 73/23/EEC and product safety
• Directive 89/336/EEC for conformity for EMC
In order to satisfy the essential requisite of the R&TTE 99/5/EC directive, the GE863-PRO3 module is
compliant with the following standards:
• GSM (Radio Spectrum). Standard: EN 301 511 and 3GPP 51.010-1
• EMC (Electromagnetic Compatibility). Standards: EN 301 489-1 and EN 301 489-7
• LVD (Low Voltage Directive) Standards: EN 60 950
In this document and the Hardware User Guide, all the information you may need for developing a
product meeting the R&TTE Directive is included.
Furthermore the Telit GE863-PRO
3
modules are FCC Approved as module to be installed in other
devices. These devices have to be used only for fixed and mobile applications. If the final product after
integration is intended for portable use, a new application and FCC ID is required.
The GE863-PRO3 module is conform with the following US Directives:
• Use of RF Spectrum. Standards: FCC 47 Part 24 (GSM850 - GSM 1900)
• EMC (Electromagnetic Compatibility). Standards: FCC47 Part 15
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by Telit Communications S.p.A. may void the user’s authority to operate
the equipment.
To meet the FCC's RF exposure rules and regulations: