User Manual

GE863-PRO
3
Product Description
80285ST10036a Rev. 1 DRAFT- 24/04/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 40 of 53
6 Evaluation Kit EVK-PRO
3
In order to assist you in the development of your Telit GE863-PRO
3
module based application, Telit can
supply an Evaluation Kit EVK-PRO
3
with appropriate power supply, SIM card holder, RS232 serial port
level translator and USB host & device, SD Card holder, SAM Card holder, Ethernet and antenna
connection.
The development of the applications utilizing the Telit GE863-PRO
3
module must present a proper design
of all the interfaces towards and from the module (e.g. power supply, audio paths, level translators),
otherwise a decrease in the performances will be introduced or, in the worst case, a wrong design can
even lead to an operating failure of the module.
In order to assist the hardware designer in his design phase, the EVK board presents a series of
different solutions, which will cover the most common design requirements on the market, and which
can be easily integrated in the OEM design as building blocks or can be taken as starting points to
develop a specific one.
For a detailed description of the Telit GE863-PRO
3
Evaluation Kit refer to the documentation
provided with the Telit GE863-PRO
3
Hardware User Guide and User Manual.