User's Manual
Table Of Contents
- 1 Overall Architecture Of 1x1 Test System 2.1
- 2 Hardware Platform Building
- 2.1 Check External Antenna
- 2.2 Cable connection
- 2.2.1 Connection points on EVK daughter board
- 2.2.2 Cable connection between EVK daughter board and PCB antenna
- 2.2.3 Cable connection between EVK daughter board and buzzer
- 2.2.4 Cable connection between EVK daughter board and Mechanical structure
- 2.2.5 Cable connection between EVK daughter board and DUT
- 2.2.6 Other cable connection
- 3 Firmware Burning For EVK Daughter Board
- 4 Observe Test Result Via PC Software EvkMonitor
- 5 Update PCBA (DUT) Firmware
- Appendix 1 Test Item List On PC Software “EvkMonitor”
- Appendix 2:Hardware List
- Appendix 3:Dimension chart of EVK daughter board and buzzer board
Assembly And Maintenance Manual for Telink Test System 2.1
AN-16052600-E3 2 Ver 1.2.0
Revision History
Version
Major Changes
Date
Author
1.0.0
Initial release
2016/5
H.Z.F., L.X., Cynthia
1.1.0
Updated buzzer related contents,
including: buzzer module photo,
cable connection between buzzer
and EVK daughter board, cable
connection chart, test system photo,
Amic test item, buzzer spec in
hardware list, and dimension chart
of buzzer board.
2016/8
T.J.B., Cynthia
1.2.0
Updated the “spec” column in
hardware list.
2016/9
H.Z.F., Cynthia