User's Manual
Table Of Contents
- 1 Overall Architecture Of 1x1 Test System 2.1
- 2 Hardware Platform Building
- 2.1 Check External Antenna
- 2.2 Cable connection
- 2.2.1 Connection points on EVK daughter board
- 2.2.2 Cable connection between EVK daughter board and PCB antenna
- 2.2.3 Cable connection between EVK daughter board and buzzer
- 2.2.4 Cable connection between EVK daughter board and Mechanical structure
- 2.2.5 Cable connection between EVK daughter board and DUT
- 2.2.6 Other cable connection
- 3 Firmware Burning For EVK Daughter Board
- 4 Observe Test Result Via PC Software EvkMonitor
- 5 Update PCBA (DUT) Firmware
- Appendix 1 Test Item List On PC Software “EvkMonitor”
- Appendix 2:Hardware List
- Appendix 3:Dimension chart of EVK daughter board and buzzer board
Assembly And Maintenance Manual for Telink Test System 2.1
AN-16052600-E3 21 Ver 1.2.0
5 Update PCBA (DUT) Firmware
Connect the EVK daughter board with PC via an USB cable.
Double click the “EvkMonitor.exe” under the folder
“System_V3.0_20160316\Script\Monitor”.
Click “download” under the menu “Evk” to open the burning interface.
To update firmware only, it’s not needed to modify test.tls and product.ini for
the EVK daughter board.
1. Tick the box in front of “Burning file”. Then click the “Burning file” button and
select the target bin file (no limitation to the file name) in the pop-out window.
The path of the selected bin file will be available in the box behind the “Burning
file” button. The MD5 code calculated by the bin file will be available in the box