User's Manual

Telink Dongle TLSR9518ADG80D user manual
Telink Confidential and Proprietary 6 Ver.0.1.0
Figure 2-2 3.3V power supply
2.2 Download firmware
There are also two ways to download firmware, USB burning or SWS burning. But need another burning tool Telink
Burning EVK. Telink Burning EVK have USB port and 3.3V/SWS/GND port. When using USB download firmware, just plug
dongle USB in Burning EVK. When using SWS download firmware, connect 3.3V/SWS/GND of dongle to 3.3V/SWM/GND of
Burning EVK.
2.3 Functions of each module
As shown in figure2-3, The functions of each module on the board have been marked. There is a PCB antenna to
transmit data packets. There are LED, button and debug port on board. The LED lights can indicate what status the
TLSR9518ADG80D is in. The button allows us to control TLSR9518ADG80D. We can use debug port to debug dongle.
The TLSR9518ADG80D also support headphone and mic functions. Realize this function according to different software
configurations