User's Manual

Telink Dongle TLSR9518ADG80D user manual
Telink Confidential and Proprietary 4 Ver.0.1.0
1. Product Introduction
This is a user manual for Telink Dongle TLSR9518ADG80D.
1.1 General description
The Telink dongle TLSR9518ADG80D, which is based on Telink TLSR9518A chip.
The TLSR9518A supports 2.4 GHz proprietary standard, 32-bit RISC-V micro-controller Key features, a rich set of digital
and analog interfaces, hardware OTA upgrade and multiple boot switch, allowing convenient product feature roll outs and
upgrades.
1.1.1 RF Features
1. 2.4 GHz RF transceiver in worldwide 2.4 GHz ISM band
2. Tx output power: up to +8.5dBm
3. Rx Sensitivity: up to -96dBm
4. 50 Ω matched single-pin antenna input
5. RSSI monitoring with +/-1 dB resolution
6. Auto acknowledgment, retransmission and flow control
1.1.2 Power Management Features
1. Low power controller by Near-Threshold level power consumption
2. Battery monitor for low battery voltage detection
3. Brownout detection/shutoff and Power-On-Reset
4. Multiple-power-state to optimize power consumption