User's Guide

Telink TLSR826XDK48 User Guide
AN-18080300-E1 10 Ver 1.0.0
3 Pin Connection Guide
3.1 Supply power for TLSR826XDK48
There are two connection methods to supply power for Telink TLSR826XDK48
board.
Method 1:
Make sure three jumper caps are connected on J9, J23 and J24 of
TLSR826XDK48.
Connect J7 (miniUSB interface) with PC USB via an USB cable.
Method 2:
Connect PIN3 and PIN6 of J3 with GND and 3.3V of a burning EVK, respectively.
Figure 3 Connection chart to supply power
J7
Option1:
1) Connect J9, J23 and J24 with Jumper Caps;
2) Connect J7 with PC USB via USB cable.
J9
J23
J24
1) Connect PIN3 with GND
Option 2: Connect J3 with
burning EVK
2) Connect PIN6 with 3.3V
3
6
J3
Telink for customer