Product Specs

Specification For Telink 8258 Mesh RCU TLSR8258MRC48
PS-19050500-E1 8 Ver 1.0.0
Telink sample BLE dongle is shown in Figure 2.
Figure 2 Telink BLE Dongle demo
2 Factory Test Mode
Factory test mode is customizable depending on user’s requirement, and it’s not
supported by all RC demos.
Following shows an implementation example:
Press the specific combination buttons (to be determined), power on the RC with
the buttons held, the indicating LED of the RC will blink to indicate the RC enters
factory test mode.
In factory test mode, the RC won’t send pairing/adv packet unless specific button
is clicked. This mode is used to test key values in a controlled way (e.g. user can
determine when to send pairing/adv packet).
The RC will exit factory test mode and enter normal state by clicking specific
button.
SW1
SW2
Red LED
White LED
Blue LED
Green LED