Product Specs

Specification For Telink 8258 Mesh RCU TLSR8258MRC48
PS-19050500-E1 10 Ver 1.0.0
4) After power cycle the paired RC/Dongle, it’s not needed to click the “SW1”
button again and the RC will be paired with the Dongle automatically.
5) After the BLE RC is successfully paired with the Dongle, if the RC is powered
down or the communication is disconnected, the white indicating LED light on
the Dongle will also be turned on. Power on the RC again or reestablish the
communication, the white light will be turned off.
4.2 Un-pairing
Once paired with the Dongle, the RC can be manually unpaired using the
following sequence:
1) Click the “SW2” button of the BLE Dongle to start un-pairing process.
2) The red LED light on the BLE Dongle will be turned off to indicate successful
un-pairing.
5 Button Function
After the BLE RC is successfully paired with the Dongle, the RC can send certain
key value by pressing corresponding button. The function of each button is shown as
in Section 1.2.
To test the simple button input, no special PC tool is needed. User can open up
Notepad on the PC with dongle plugged in, key presses such as 1, 2, 3, …, will be
directly taken as input to the text file.
User can also use PC tool (KeySimulator) to simulate button press, release and
repeat on the RC.