User's Guide

Telink TLSR8232DK32 User Guide
AN-17121200-E2 12 Ver 1.1.0
3.3 Measure power-saving mode current for TLSR8232DK32
To measure current consumption of Telink TLSR8232DK32 board in deep sleep or
suspend mode, please follow the connection steps below:
1) Remove jumper caps from J12 and J13 of TLSR8232DK32.
2) Connect anode (+) and cathode (-) of an amperemeter with anode (+) of 3.3V
power supply and PIN2 of J12, respectively.
3) Connect cathode (-) of the 3.3V power supply with PIN5 of J3.
Figure 5 Connection chart to test sleep current
J12
Remove jumper cap from J12
Remove jumper cap from J13
J3
5
Connect J12 PIN2 with Amperemeter -
Connect J3 PIN5 with 3.3V power supply -
J13
1
2
Telink for customer