User's Guide

Telink TLSR8232DK32 User Guide
AN-17121200-E2 10 Ver 1.1.0
3 Pin Connection Guide
3.1 Supply power for TLSR8232DK32
Three connection methods are supported to supply power for Telink
TLSR8232DK32 board.
1. Method 1:
Make sure a jumper cap is connected on J12 of TLSR8232DK32.
Then connect J15 (miniUSB interface) with PC USB via an USB cable.
2. Method 2: Connect PIN3 and PIN5 of J3 with 3.3V and GND, respectively.
3. Method 3: Connect PIN1 and PIN2 of J38 with 3.3V and GND, respectively.
Figure 3 Connection chart to supply power
J15
J12
Option1:
1) Connect J12 with Jumper Cap;
2) Connect J15 with PC USB via USB cable.
J3
3
5
1
2) Connect J3 PIN5 with GND
1) Connect J3 PIN3 with 3.3V
Optional 2:
1
2
Optional 3:
1) Connect J38 PIN1 with 3.3V
2) Connect J38 PIN2 with GND
J38
Telink for customer