User's Manual

z LCD Backlight Set Specific LCD and Keypad Backlight time.

12.2.1 Tone setup

Sets tones for Incoming Call, Alarm, Power On, Power Off, Message Tone and Keypad

Tone.

Note : For each set tone setup, you can choose one from 10 sing Rings and 6 MIDI

tones.

12.2.2 Volume

7 volume levels are available for Ring Tone and Key Tone. Adjust the volume per your

preference.

12.2.3 Ring Type

You can set the ringer to play repeatedly or to play in ascending.

⑤ Select [Ring Type] and Press Ok

⑥ Toggle Repeat or Ascending and Press Ok

12.2.4 Extra Tone

Extra Tone includes Warning, Error, Camp on and Connect tones.

⑤ Toggle On or Off to following options to mark or clear the check box and press

Done. If Camp on is set to On, the tone rings when camp on a network. If

Connect is set to On, tone rings when an outgoing call is established

successfully.

z Warning

z Error

z Camp on

z Connect

12.2.5 Answer Mode

This allows user to set answer mode. If any key is marked, user can answer an incoming

call pressing any key. If lift answer is marked, when handy is in a cradle, if user picks up

handy, call can be automatically answered without pressing any key.