User's Manual

following steps.

a. Push the T-Flash holder in the direction of the arrow and hold it in this position.

b. Insert a T-Flash under the two tabs on the right side of the phone, ensuring that the gold contact

of the card face downward.

c. Hold and push the T-Flash left direction and release the rubber into place.

5.2 How to remove the T-Flash

Ensure the phone is switched off and the travel charger is detached first before you start the

following steps.

a. Remove the battery.

b. Remove the T-Flash rubber and moving the T-Flash to right direction.

c. Remove the T-Flash from the holder.

6. Headset

Insert the headset plug into the jack on the left side of your phone marked

You can answer or end a call by pressing the hook button on the headset.

When you receive an incoming call while a call is in progress, you can answer the incoming call by

pressing the hook button on the headset. (The first call is automatically put on hold.)

You can make the last number dialed call by pressing the hook button when the screen is idle.

The last number dialed is launched by pressing the hook button, and then the call will be made by

pressing the hook button again.

! Note: If the headset is plugged in, your phone’s standby time will be reduced. Therefore, please