CH/4CH Network Video Server www.telexper.
1 1CH/4CH Network Video Server Product Front View: nVS-1P Product Rear View: nVS-1P 1 nVS-4P nVS-4P
2 Notice: * For nVS-1P & nVS-4P, the power is provided via PoE by Gigabit PoE HUB. Thus, it is not necessary to connect the DC12V In (pin-3) and GND (pin-4). * Please use the CAT-6 RJ-45 cable to connect each Telexper device. * Please use the 75Ω coaxial video cable connecting the camera to the video server. * The DC12V Output at pin-5 provides the max 8W electric power. * The effective distance away from the PoE Hub is 100 meters.
3 Quick Installation Step 1: nVS-1P nVS-4P Step2 Step3 Step4 Step5 3
4 Bracket Support: nVS-1P nVS-4P IP CCTV Installation Diagram Connect Cameras by using the 75 Ω coaxial video cable to nVS nVS-1P nVS-4P Connect the nVS by using the CAT-6 RJ-45 cable to PoE Hub Power Cord Uplink to network 4
