User Instructions Model PS-4001 Power Supply Audiocom® Intercom Systems 9350-7710-000 Rev.
FCC Statement This equipment uses, and can radiate radio frequency energy that may cause interference to radio communications if not installed in accordance with this manual. The equipment has been tested and found to comply with the limits of a Class A computing device pursuant to Subpart J, Part 15 of FCC Rules which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Operation 3 1 4 2 5 1. Universal AC Power Input: The unit accepts any input power in the range of 100-240 VAC, 50/ 60 Hz. 2. Connector to ES-4000A: This connector carries power to the ES-4000A expansion station, and carries the four audio channels of the ES-4000A. When a telex ES-4000A is connected to the PS-4001, each of the four channels of auido is “broken out” to the respective channel connector. 3.
Specifications General Input Power Requirements: 100 to 240 VAC, 50/60 Hz Output Power (each channel): 24 ±1 VDC, 2 A Dimensions 1.75”(44.5 mm) high x 8.25” (209.5 mm) wide x 10.31” (261.9 mm) deep Weight: approximately 2.5 lb (1.13 kg) Environmental Requirements: Storage: -20°C to 80°C, 0% to 95% humidity, non-condensing Operating: 0°C to 50°C, 0% to 95% humidity, non-condensing Intercom Channels General Connector Type: One XLR-3M audio connector for each channel.
COPYRIGHT COPYRIGHT © 2002 Telex Communications, Inc. All Rights Reserved. TRADEMARKS Audiocom® is a registered trademark of Telex Communications. Clear-Com® is a registered trademark of Clear-Com Systems. Names of other products mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. WARRANTY INFORMATION Products are warranted by Telex Communications, Inc.
