Intercom Systems Operating Instructions
Table Of Contents
- Operating Instructions
- BP-1002/BP-2002 Beltpacks Audicom Intercom Systems
- System Power
- Initial BP-1002/2002 Setup
- Operating Modes
- Changing Modes of Operation
- 9. Press and hold the Talk key, and then press and hold the Call key.
- 10. Release both keys. The Call indicator should now glow red. (The number of beeps heard in the headset indicates the current mode of operation.)
- 11. Press the Call key to change to the next mode of operation. Each press of the Call key will cause the BP-1002/2002 to change to the next mode of operation.
- 12. When the desired mode is reached, press the Talk key to select that mode and exit the mode changing function. Beeps will be ...
- TABLE 1. Modes of Operation
- Changing Modes of Operation
- Internal Switches, Jumpers and Adjustments
- Connector Pin Configurations
- Specifications
- Optional Football Modifications
- Notes
Operation 9
Connector Pin Configurations
Headset Connector
Type: XLR-4M (callout in Figure 1)
Pin 1 Headset Microphone Low
Pin 2 Headset Microphone High
Pin 3 Headphone High
Pin 4 Headphone Low
Intercom Channel Connectors
BP-1002
Type: One XLR-3M and XLR-3F pair (callout 8 in Figure 1)
Audiocom
®
Mode (Internal switch SW1 set to BAL position)
Pin 1 Common
Pin 2 Intercom audio/call low and +24VDC input
Pin 3 Intercom audio/call high and +24VDC input
Clear-Com
®
Mode (Internal switch SW1 set to UNBAL position)
Pin 1 Common
Pin 2 +30VDC input
Pin 3 Intercom audio/call signal
BP-2002
Type: One XLR-6M and XLR-6F pair (callout 7 in Figure 1)
Audiocom
®
Mode (Internal switch SW1 set to BAL position)
Pin 1 Common
Pin 2 Local Power (21-30VDC)
Pin 3 Channel A intercom audio/call low and +24VDC input
Pin 4 Channel A intercom audio/call high and +24VDC input
Pin 5 Channel B intercom audio/call low and +24VDC input
Pin 6 Channel B intercom audio/call high and +24VDC input
Clear-Com
®
Mode (Internal switch SW1 set to UNBAL position)
Pin 1 Common
Pin 2 Local Power (21-30VDC)
Pin 3 Channel A +30 VDC input
Pin 4 Channel A intercom audio/call signal
Pin 5 Channel B +30VDC input
Pin 6 Channel B intercom audio/call signal