Operation Manual

24 Operation and Maintenance Ascend
Bosch Security Systems, Inc.
Technical Manual
F.01U.196.221
Rev. 08
Configure the Speaker Volume
Speaker Volume is configured using dip switch settings located on the main board of the headset. The switch bank is located
on the boom mic module and the listen only module.
To access the dip switches, do the following:
NOTE: Dip switches are located on the boom mic module and the listen only module. This feature is not available
on the audio input module.
> Locate the dip switch window on the back of either the boom mic module or the listen only module.
Dip Switch Settings
NOTE: The two (2) right-most switches are used to configure speaker volume.
TABLE 1. Speaker Volume Dip Switch Settings
Dip Switch Description
Intensified
Volume
Normal Volume