Operation Manual

Supplemental Information
43
N750 Wireless Dual Band Gigabit Access Point WNDR4300-TN
Factory Settings
You can return the access point to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Restore Factory Settings button on the back of the access
point for at least five seconds. The access point resets and returns to the factory
configuration settings shown in the following table.
Feature Default behavior
Access point
login
User name (case-sensitive) admin
Login password (case-sensitive) password
Local network
(LAN)
LAN IP address 192.168.0.51
Subnet mask 255.255.255.0
Time zone GMT +01:00
Time zone adjusted for daylight
saving time
Disabled
Allow a registrar to configure this
router
Enabled
Wireless Wireless communication Enabled
SSID name See access point label
Network key See access point label
Channel width - 2.4 GHz 20 Mhz
Channel width - 5 GHz Auto
Security WPA-PSK(TKIP) + WPA2-PSK(AES)
Broadcast SSID Enabled
Transmission speed Auto
*
* Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Country/region Europe
RF channel Auto
WiFi standard 2.4 GHz: b/g/n
5 GHz: a/n