Operation Manual

Administration
29
N750 Wireless Dual Band Gigabit Access Point WNDR4300-TN
Wireless Settings
The following information displays for the 2.4 GHz and 5 GHz bands:
Name (SSID).
The wireless network name (SSID) that the access point uses.
Region.
The geographic region where the access point is being used. It might be illegal
to use the wireless features of the access point in some parts of the world.
Channel. Identifies the operating channel of the wireless port being used.
The default
channel is Auto. When Auto displays, the access point finds the best operating channel
available.
W
iFi Standard. For 2.4 GHz, either B/G (54 Mpbs) or B/G/N (130–300 Mbps). For 5.0
GHz, either A (54 Mpbs) or A/N (216–450 Mbps).
W
ireless AP. Indicates whether the radio feature of the access point is enabled. If this
feature is not enabled, the 2.4 GHz and 5 GHz LEDs on the front panel are off.
Broadcast Name. Indicates whether the access point is broadcasting its SSID.
W
ireless Isolation. Wireless clients cannot communicate directly with each other or see
each other’s private information.
W
i-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for this
network.