PROGRAMMING INSTRUCTIONS SP200 / SP300 / SP400
Programming Flash Timing into Memory Flash Timing can be programmed into the Spectrum PLUSTM speed dial memory. This function allows for a timed line break in the sequence of the dialing patterns when using the speed dial keys. This function may be required for accessing line features provided by your telephone system or local telephone company. The flash timing options are 100 through 1000 milliseconds, programmable in 100mS increments.
Programming Flash Timing Flash timing can be programmed for different timing options listed below. 1. Position the handset in the Off-Hook position (lift the handset). 2. Press the “STORE” key once. 3. Press “*” key for 3-seconds until an alert sound is heard. 4. Press the following keys on the keypad in the order shown: For For For For For For For For For For 100mS press "1", then “#”. 200mS press "2", then “#”. 300mS press "3", then “#”. 400mS press "4", then “#”. 500mS press "5", then “#”.
Programming Pause Timing A Pause time between 1.0-seconds to 5.0-seconds can be programmed into memory. This function allows for a delayed timing for those systems requiring a different time delay and allows the user to delay the dialing pattern of a number. This function may be required for accessing line features provided by telephone provider or local telephone company. A speed dial number may need to pause during its dialing sequence to ensure proper connections.
Programming a Pause into Speed Dial Memory Pause time can be programmed into the speed dial memory. This function will delay the dialing pattern of a number when stored in the phones speed dial memory. Multiple pauses can be programmed into the dialing pattern for added delay time. To store a Pause into Speed Dial memory, simply press the Pause key in the numbering sequence when programming Speed Dialing Keys. See programming Speed Dial Memory on the next page.
Programming Voice Mail The Spectrum PLUSTM Telephone has a one-touch speed dial Voice Mail key that is convenient for dialing into your Voice Mail service. • • • Speed dial programming must be done with the telephone plugged into the telephone line and power adapter. Programming can be performed with the telephone off-hook only. A maximum of 32-digits can be entered into ENTER NUMBER. Programming Procedure 1.
Programming Procedure Speed Dial Features The Spectrum PLUSTM Telephone has eleven (11) one-touch speed dial locations that are convenient for dialing frequently used telephone numbers. • Speed dial programming must be done with the telephone plugged into the telephone line and power adapter. • Programming can be performed with the telephone off-hook only. • A maximum of 32-digits can be entered into ENTER NUMBER. Programming Procedure 1.
