Master Meter, Inc. 101 Regency Parkway Mansfield, TX 76063 800-765-6518 Toll Free 817-842-8000 Main Line 817-842-8050 Voice Mail 817-842-8100 FAX Universal 2 User Guide FCC ID: NTAXMETER31 Manufacturer: Telematics-Wireless Ltd. Rev 1.
Master Meter, Inc. 101 Regency Parkway Mansfield, TX 76063 800-765-6518 Toll Free 817-842-8000 Main Line 817-842-8050 Voice Mail 817-842-8100 FAX CAUTION: The User and the Installer should be aware that changes and modifications to the equipment not expressly approved by Master Meter could void warranty and the user's authority to operate the equipment. Professionally trained personnel should install the equipment.
Master Meter, Inc. 101 Regency Parkway Mansfield, TX 76063 800-765-6518 Toll Free 817-842-8000 Main Line 817-842-8050 Voice Mail 817-842-8100 FAX 1 ‐ Place Setting ° The Universal Dialog 3G unit can be wall mounted in an external open site or within buildings Note: The Universal Dialog 3G data transmission may be adversely affected if it is installed close to RF or EM noise generators, for example: air conditioner units, electric generator, radio transmitter, car parking and others.
Master Meter, Inc.
Master Meter, Inc.
Master Meter, Inc.
Master Meter, Inc. 101 Regency Parkway Mansfield, TX 76063 800-765-6518 Toll Free 817-842-8000 Main Line 817-842-8050 Voice Mail 817-842-8100 FAX 3 – Installation Procedure The Universal Dialog 3G is intended for wall installation in open sites and buildings. 1. 2. 3. 4. 5. Mark the locations of the four screws on the wall, according to the holes in the enclosure of the unit. Drill 4 holes and insert the Plastic masonry inserts. Connect the unit with the four screw supplied.
Master Meter, Inc. 101 Regency Parkway Mansfield, TX 76063 800-765-6518 Toll Free 817-842-8000 Main Line 817-842-8050 Voice Mail 817-842-8100 FAX 4 – Connection Guide The Universal Dialog 3G can be connected to 4 outputs (2‐wire outputs). 1. Connect the first wire in each cable to output and the second to GND. There is no significance to colors.
Master Meter, Inc. 101 Regency Parkway Mansfield, TX 76063 800-765-6518 Toll Free 817-842-8000 Main Line 817-842-8050 Voice Mail 817-842-8100 FAX 5 – Programming 5.1 – Unit registration ° The Universal Dialog 3G is ready use when all parameters are programmed and the transmitter is turned on. ° Each radio unit is supplied with detachable bar code that should be glued to the document that identifies the specific meter.
Master Meter, Inc. 101 Regency Parkway Mansfield, TX 76063 800-765-6518 Toll Free 817-842-8000 Main Line 817-842-8050 Voice Mail 817-842-8100 FAX 5.2 – Unit Programming Perform the Universal Dialog 3G programming with the help of Handheld PC+MMR‐US tool, according the following steps: Activate the Universal Dialog 3G. 1. 2. Check if the Universal Dialog 3G's transmission is OK. Enter the user code. 3. 4. Program the output pulse value (gallons, cubic‐feet, etc.). 5. Program reading.
