User's Manual

1.2. Functionality

• On/Off and dimming functionality using automatic DALI/ 0-10 volt selection

• Luminaire power consumption measurement to 1% accuracy

• Analog and digital input for interfacing with external sensors

• Auto-commissioning with GPS or NFC chip

• Internal or external configurations

• Highly secure wireless communication utilizing AES-128 or AES- 256

• Enclosures - NEMA: ANSI C136.41, 7pin

• Dual backup protection – autonomous operation based on a pre-programmed scenario; built in light,

no dayburn

• Supports over the air firmware upgrade

• Data and settings preserved in case of power failure

• LCU NEMA stores history of measured parameters for at least a week to allow for data extraction

• Controlled Auxiliary Output (optional)

• Includes the Telematics “Auto Detection and Verification” software that automatically detects and

stores the ballast type (1-10V or DALI) in the LCU NEMA. The ballast type is then retrieved during the

commissioning process, thereby eliminating the need to enter it manually into the CMS.

1.3. Reports

• Reports of events related to exceeding established parameter limits

• Aggregate energy and active power consumption

• Burning hours

• Number of On/Off cycles

• Failure reports

• Various luminaire dynamic parameters such as: instantaneous levels of ambient light, power

consumption, voltage, current, power factor, temperature.

LCU NEMA