User's Manual

FP300RA User Manual
2140-72018-00-0A REV: A Page 36 Of 38
B-6. Hot List
The hot list functionality is described in Chapter 3. A typical Hot List Control window is shown in
Figure B-5
Figure B-5: Typical Hot List Control Window
The window includes the following buttons:
Get Hot Lists
Get currently set hot lists.
Clear hot list(s)
Clear the selected hot list. Select 0 to clear all the hot lists.
Save HL
Save the current hot list setting as default setting.
Load HL from file
Load the hot list settings from a script file.
Add TAG
Add a selected transponder with Mask to a selected hot list.
Rem. TAG
Remove a transponder with Mask from a hot list.
Set Auto function
Set the auto-function for the selected hot list.
B-6.1 Auto-Function
The auto-function is selected from the Function list. When a function is selected, the relevant data
field will be opened.
The Digital output setting is not applicable and the mask field should be 0.