User's Manual

FP300RA User Manual
2140-72018-00-0A REV: A Page 25 Of 38
3.4.4 Set Hot List Auto Function
• Select the desired hot list in the HL ID – AF ID window, or type the hot list ID in
the Selected HL field.
• Select the auto-function type and its parameters in the Auto Function area.
• Select the digital output setting in the Auto Function area.
• Click the Set Auto Function button.
• If the hot list is already defined, then its auto-function is replaced.
• If not, then a new hot list is defined.
3.4.5 Add Transponder to Hot List
• Select the desired hot list in the HL ID – AF ID window, or type the hot list ID in
the Selected HL field.
• Enter the transponder ID in the Selected Tag ID.
• Click Add TAG button:
• If the transponder is already a member of the specified hot list, the FP-
300RA will reject the command (reject code 07)
• If the transponder is already a member of the another hot list, the FP-
300RA will change the transponder hot list
• If the hot list is not defined, then a new hot list is defined.
3.4.6 Remove Transponder from Hot List
• Select the transponder in the Members window or enter the transponder ID in the
Selected Tag ID.
• Click the Rem TAG button. If the transponder is not in the specified hot list, the
FP-300RA will reject the command (reject code 0A).
3.4.7 Saving the Hot List
Click the Set Hot list button to make the current hot lists setting the FP-300RA default hot list.