User's Manual

FP300RA User Manual
2140-72018-00-0A REV: A Page 24 Of 38
3.3.9 Setting Digital I/O
The digital I/O setting enables:
• Set the digital output setting when the FP-300RA is powered up
• Set the input sense function by:
• Selecting the required input, Sense mask.
• Set the polarity for each selected input, Sense polarity.
3.3.10 Save Current Settings
After completing the FP-300RA configuration, click the Save current setting button. The FP-
300RA will save the settings and reboot.
3.4 Hot List Configuration
The hot list function enables the FP-300RA to activate a predefined transponder access
function when a transponder enters the FP-300RA communication zone. To configure the hot
list, click the Setting – Hot Lists button of the main window of the maintenance utility to
display the Hot List Control window.
3.4.1 Get Hot List Status
• Click the Get Hot Lists to get the list of currently-defined hot lists
• Select the desired hot list in the HL ID – AF ID window to view the hot list
members and the predefined auto-function.
3.4.2 Remove Hot List
• Select the desired hot list in the HL ID – AF ID window, or type the hot list ID in
the Selected HL field.
• Click the Clear hot list(s) button. If the selected hot list is 255, default hot list,
then all the hot lists will be removed, and the auto-function of the hot list 255
(default hot list), will be set to No Auto Function.
3.4.3 Add New Hot List
A new hot list is added by setting its auto function, or by adding a transponder.