User's Manual

FP200INT User Manual
1. General Information
1.1 Introduction
The T-SEAL int is a TDMA seal, based on AVI transponder with enhanced functions. The
T-Seal int is compatible to currently installed TDMA reader in variety of projects, such as
WIM and border crossing. Additionally, Telematics-Wireless provides handheld reader for
T-Seal int information access and setting.
Note:
Everywhere 2.4 GHz is mentioned, the actual real frequency is 2.44 GHz.
1.2 Purpose
The purpose of this document is to provide detail instruction for installing, activating and
monitoring an T-Seal int.
The installation procedure is performed with the FP-200HH handheld reader at the working
frequency of 2.4 GHz.
Note that the T-Seal int is a slave device that communicates with the requester, handheld
reader (2.4 GHz) or way-side reader (915 MHz), according to the requester frequency.
1.3 Preparation
Before installing an T-Seal int in a container, make sure you have the following:
1. 1 x TDMA Seal: T-Seal int with 3M Dual Lock™ strip.
2. 1 x Sensor magnet with 3M Dual Lock™ strip.
3. 2 x 3M Dual Lock™ strips for container doors.
4. 1 x Bag with surface cleaner for 3M Dual Lock™ strip.
2. INSTALLATION PROCEDURE
2.1 Prepare the T-Seal int
The 1
st
phase is to verify that the T-Seal int is ready without any history saved in it.
2140-72017-00-0A REV: C Page 4 Of 10