User's Manual

FP200INT User Manual
2140-72017-00-0A REV: C Page 10 Of 10
3. MONITOR T-SEAL INT STATUS
3.1 Monitor T-Seal int Status Using Handheld Reader
See HH reader user manual.pdf
3.2 Monitor T-Seal int Status Using TDMA Reader
A standard TDMA reader can get the T-Seal int status by performing read internal memory
command.
In standard AVI transponder the 4 bytes followed the transponder ID are 0.
In the T-Seal int this field is used to report the T-Seal int status
Where:
Byte 0: D7 - T-Seal int flag, D1 – Tampered, D0 – Activated
Byte 1: Number of tampering records
Byte 2: Number of sealing records
Byte 3: Sensors’ current status (bit-wise, 1 = tampered)