Operation Manual

FUNKTIONSMENUE
59
8
11
9
10
8
4
5
6
7
QUICK USER GUIDE TO CUT OFF
D
3 1
2
INSTALLATION
Connections
Plug the handset cord into the fax machine (1).
Plug the telephone cord into the connector (2) on the machine and the
other end to the telephone socket on the wall.
Plug the power supply unit into the fax machine (3) and the other end to the main
power supply.
Ink ribbon
Open the front (4) and the back (5) covers of the housing.
Place the ink ribbon in its mounting (6) without removing the
adhesive tape, with the large roll at the right end of the
spring-loaded axel.
Remove the adhesive tape.
Place the empty roll in its mounting (7).
Remove the cover (8) of the chip card.
Remove the small chip card (9) from the support card (10).
Insert the new chip card (9) in the slot (11) with the chip facing towards you and cut-
off corner top right.
Replace the cover (8).
Close the back cover (5), then the front cover (4).
LIASSE_23227370-8D_QuickGuide_307PA.p65 17/06/99, 14:1359