Operation Manual

Table Of Contents

Enhanced phone functions

Step by step

Connecting parties

Select and confirm the option shown in the active con-

nection's context menu. The other two parties are now

connected to one another. You can now hang up or dial

another number for instance.

or Connect by hanging up

Prerequisite: Connecting by hanging up is activated

(ask your administrator) and "Switch assignment" must

be set to "Yes" (Æ page 75). Before you can be con-

nected by hanging up you must have toggled at least

twice (Æ page 47).

] or n Replace the handset or, if you are in speakerphone

mode, press the loudspeaker key. The other two parties

are now connected to one another.

Allowing call waiting

Prerequisite: The option was programmed by your

administrator.

You can also configure this setting via the Web interface

Æ page 125.

N Press the key shown.

Select and confirm the option shown.

if nec.

j Enter and confirm the User password.

Select and confirm the option shown.

Complete Xfer

If the Call waiting (second call) function is deacti-

vated, a caller hears the busy signal if you are

already conducting a call.

Settings

User

Configuration

Incoming calls

Handling

Allow call waiting

Yes