Operation Manual

Individual phone configuration
117
Step by step
Key click
You can select here whether a tone should be heard
when a key is pressed. You can also decide whether
this should apply for all keys or only those on the key-
pad. In addition, you can adjust the tone volume or dis-
able the tone.
z
You can also configure this setting via the Web interface
Æ page 125.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.
j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Setting the volume for Key click
Select and confirm the option shown.
For instance, select and confirm a medium volume set-
ting. You can choose between the following options:
•Low
• Medium
• High
• Off (no click)
Key selection
Select and confirm the option shown.
Select and confirm if only the keys for entering charac-
ters are to be affected.
or
Select and confirm the option shown.
Confirm the option shown.
Settings
User
Phone
Key click
Volume
Medium
Keys
Keypad only
All keys
Save & Exit