Operation Manual

Enhanced phone functions

Step by step

Call waiting (second call)

You can accept a second incoming call in the course of

an ongoing call. The caller hears the on-hook signal

while you hear a call-waiting signal tone. A bell appears

on the display and next to it the phone number of the

caller is shown.

You can ignore or accept the second call. Before you

accept the second call, you can end the first call or place

it on hold for subsequent retrieval.

You can block the second call or the signal tone

(Æ page 69).

Accepting a second call

Prerequisite: You are conducting a call and call waiting

is allowed ( Æ page 69).

Select and confirm the option shown.

You can talk to the second party.

The connection to the first party is on hold.

During the call with the second party, additional

functions are available for selection:

• Alternate (see Æ page 39),

• Complete transfer (see Æ page 41),

• Conference (see Æ page 80),

• Blind transfer (see Æ page 71),

• Hold (see Æ page 62).

• Put on hold and retrieve second and first call alter-

nately Æ page 40

Consultation call from second call

If the second call is your active call you can initiate a

consultation call from it.

From a consultation call in the second call you can

• initiate a conference

• toggle between the second call and a consultation

call

• put on hold and retrieve second and first call alter-

nately Æ page 40

• transfer a call

• disconnect the calls again

During a consultation in the second call, the first call is

parked and can only be unparked if the consultation or

second call is ended or the calls are connected.