Operation Manual

Basic Use

1. Press the button on the unit or on the remote control to switch on the TV. The power indicator

will light up in green color. Press the

button again to switch to standby mode, the indicator

will change to red.

2. Press the VOL.- or VOL.+ button to adjust the volume level. Press the VOL.- button repeatedly to

decrease the volume; press the VOL.+ button repeatedly to increase the volume from 0 to 100.

Select DTV or ATV for example. (Press INPUT button to select DTV or ATV mode)

1. Press the

button to turn the LED TV on.

2. Press MENU button to display the main menu, and press the ◄► button to select CHANNEL in

the main menu, it will highlight the rst option.

3. Press the ▼ button to select Auto Tuning and press the OK button to start auto search, and use

the ◄► buttons to select the country in which you will operate the TV ( You need to select your

current aerial if you wish to receiving all channels reliably ). The Auto Tuning automatically creates

a list of receivable channels. Press the EXIT button at any time to interrupt the memorization process

( The list cannot be created if interrupted )

Basic Operation

ATV Manual Tuning

DTV Manual Tuning

Color System PAL

Sound System I

Fine - Tune 471.00 MHz

AFC On

Serch

Current CH 1

UHF CH 21

NO SIGNAL

Bad Freq: 474.00 Mhz Good

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

Programme Edit

Signal Information

CI Information

Return

Select

Move

Exit

EXIT

CHANNEL