Operation Manual

User Guidance Information

ENGLISHENGLISH

1. Check the polarity (+,-) of the batteries in the remote control.

2. Check that the batteries have power.

3. Check that the LED TV is powered and that it is properly plugged in.

4. Check if any three-wavelength lamp, special uorescent or neon sign is turned on near the LED TV.

1. Open the cover completely.

2. Insert the two supplied batteries (AAA, 1.5V). Ensure that the polarities (+ and -) of the batteries are

aligned correctly.

3. Side back the cover.

CAUTION: Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the national code (Recycling programmes).

·The remote control should be operated within 30 feet (7m) and 30° to the left and the right of the

IR receiver at the front of the LED TV.

·Used batteries should be disposed properly.

Precautions

How to Use the remote control

Avoiding Remote Control Problems

Inserting Batteries in the Remote Control