User guide
Trace Oxygen Analyzer
Teledyne Analytical Instruments xi
4.4.2.1 Auto Mode Spanning 51
4.4.2.2 Manual Mode Spanning 52
4.4.3 Span Failure 53
4.5 Switching of Sample Streams 54
4.5.1 Special Notes on Hydrogen Gas Stream 55
4.6 The Alarms Function 55
4.7 The Range Function 57
4.7.1 Setting the Analog Output Ranges 58
4.7.2 Fixed Range Analysis 59
4.8 The Analyze Function 59
4.9 Signal Output 60
4.10 The IP Address Function 61
4.11 Cold Boot to Return to Default Settings 62
Web Implementation ................................................................... 63
5.1 The Embedded Browser 63
5.2 Remote Calibration 65
5.2.1 Remote Span 65
5.2.2 Remote Zero 67
5.3 Set the Alarms Remotely 68
5.4 Set the Ranges Remotely 69
5.5 System Menu 70
5.6 The Self-Test function 71
Maintenance ................................................................................. 73
6.1 Routine Maintenance 73
6.2 Cell Replacement 73
6.2.1 Storing and Handling Replacement Cells 73
6.2.2 When to Replace a Cell 74
6.2.3 Removing the Micro-Fuel Cell 75
6.2.4 Installing a New Micro-Fuel Cell 75
6.2.5 Cell Warranty 77
6.3 Fuse Replacement 78
6.4 System Self Diagnostic Test 79