Manual

A.1
TELEDYNE ANALYTICAL INSTRUMENTS
AppendixAppendix
AppendixAppendix
Appendix
AppendixAppendix
AppendixAppendix
Appendix
SpecificationsSpecifications
SpecificationsSpecifications
Specifications
Ranges:Ranges:
Ranges:Ranges:
Ranges: 0–100% H
2
in CO
2
0–100% air in CO
2
90–100% H
2
in air
Sealed reference gas:Sealed reference gas:
Sealed reference gas:Sealed reference gas:
Sealed reference gas: Helium
Zero drift:Zero drift:
Zero drift:Zero drift:
Zero drift: <1% per day
Accuracy:Accuracy:
Accuracy:Accuracy:
Accuracy: ±5% of full scale or better, depending on
the range selected.
Response time:Response time:
Response time:Response time:
Response time: 90% in 50 seconds.
Sample flowrate:Sample flowrate:
Sample flowrate:Sample flowrate:
Sample flowrate: 0 to 0.5 SCFH.
Area classification:Area classification:
Area classification:Area classification:
Area classification: General purpose (non-hazardous) areas.
Signal output:Signal output:
Signal output:Signal output:
Signal output: 0 to 1 VDC.
mVDC output also available.
Meter readout:Meter readout:
Meter readout:Meter readout:
Meter readout: Integral analog meter.
Operating temperature:Operating temperature:
Operating temperature:Operating temperature:
Operating temperature: +32 to +125 °F (0 to +52 °C).
Electrical requirements:Electrical requirements:
Electrical requirements:Electrical requirements:
Electrical requirements: 115 VAC, 60 Hz, 115 Watts.
100 or 220 VAC, 50/60 Hz also available.
Approximate dimensions:Approximate dimensions:
Approximate dimensions:Approximate dimensions:
Approximate dimensions: H × W × D
9 " × 10 " × 14 "
230 mm × 250 mm × 360 mm
Approximate weight:Approximate weight:
Approximate weight:Approximate weight:
Approximate weight: analyzer: 10.5 lbs. (4.8 kg).
power cord: 0.7 lbs. (0.3 kg).