User guide

Trace Nitrogen in Argon Analyzer
Teledyne Analytical Instruments vii
3.2 Choosing a Location 18
3.3 Mounting 18
3.4 Rear Panel Connections 19
3.5 Electrical Connections 20
3.5.1 Primary Input Power 20
3.5.2 50-Pin Equipment Interface Connector 20
3.5.3 RS-232 Port 26
3.6 Gas Connections 27
3.6.1 Typical Sample System 29
3.6.2 Gas Connections to the Instrument 31
3.7 Purging 31
3.8 Calibration 33
3.9 Installation Checklist 33
Operation....................................................................... 35
4.1 Powering Up the Analyzer 36
4.2 Zero and Span Calibration 36
4.3 Setup and Operation General Information 37
4.4 Using the Data Entry and Function Buttons 37
4.5 Analyzer Functions 38
4.5.1 System Menu 39
4.5.1.1 Digital Filter 40
4.5.1.2 Self-Test 41
4.5.1.3 Password Protection 42
4.5.1.4 Logout 46
4.5.1.5 ERR 46
4.5.1.6 Auto Calibration (Auto Cal) 47
4.5.1.7 Flow 49
4.5.1.8 Tracking During Calibration 49
4.5.1.9 Calibration Hold Timer (Calholdtimer) 50
4.5.1.10 The Model Screen 50
4.5.1.11 Analog Output Calibration (Out_Cal) 51
4.5.1.12 Linearize (Lin) 52