Owner manual

Teledyne Analytical Instruments
1-4
1 Introduction Model 2020
Figure 1-1: Model 2020 Front Panel
1.5.1 UP/DOWN Switch
Functions: The UP/DOWN switch is used to select the function to be
performed. Choose UP or DOWN to scroll through the following list of
fourteen functions:
• AUTO-CAL Set up an automatic calibration sequence.
• PSWD Install a password to protect your analyzer setup.
• LOGOUT Locks Setup Mode.
• MODEL Displays model and version of analyzer.
• SELF-TEST Runs internal diagnostic program, displays results.
• SPAN Span calibrate the analyzer.
• ZERO Zero calibrate the analyzer.
• ALARMS Set the alarm setpoints and attributes.
• RANGE Set up the 3 user definable ranges for the instrument.
• APPLICATION Set up the 3 definable application ranges
• ALOGORITHM Set up the linearization
• CAL-INDEPD Calibration range independently