User guide

4 Operation Model 2010A
4-8 Part I
Teledyne Analytical Instruments
If you chose Enter to change the password, the password assignment
screen appears.
Select new password
T A I
Enter the password using the < > arrow keys to move back and forth
between the existing password letters, and the
ΔΔ
ΔΔ
Δ∇ arrow keys to change the
letters to the new password. The full set of 94 characters available for password
use are shown in the table below.
Characters Available for Password Definition:
ABCDEFGHI J
KL MNOPQRST
UVWXYZ]^
_` abcdef gh
i j kl mnopqr
st uvwxyz{ |
} ! " #$%&' (
)*+'-./012
3456789: ; <
=>?@
When you have finished typing the new password, press Enter. A verifica-
tion screen appears. The screen will prompt you to retype your password for
verification.
Enter PWD To Verify:
A A A
Use the arrow keys to retype your password and press Enter when
finished. Your password will be stored in the microprocessor and the system will
immediately switch to the Analyze screen, and you now have access to all
instrument functions.
If all alarms are defeated, the Analyze screen appears as:
1.95 % H2 in N2
nR1: Ø — 1Ø Anlz
If an alarm is tripped, the second line will change to show which alarm it is:
1.95 % H2 in N2
AL—1