User guide

Teledyne Analytical Instruments
iv
Model 2010A
Specic Model Information
The instrument for which this manual was supplied may incorporate one or more
options not supplied in the standard instrument. Commonly available options are listed be-
low, with check boxes. Any that are incorporated in the instrument for which this manual
is supplied are indicated by a check mark in the box.
Instrument Serial Number: _______________________
Options Included in the Instrument with the Above Serial Number:
q C: Auto Calibration valves (zero/span/sample) built-in gas control
valves are electronically controlled to provide synchronization
with the analyzers operations.
q G: Stainless steel cell block with nickel laments and Stainless
Steel ttings and tubing.
q H: Stainless steel cell block with gold laments for corrosive gas
streams and Stainless Steel ttings and tubing.
q K: 19” Rack Mount option with one or two analyzer Control
Units installed and ready to mount in a standard rack.
q K2: 19” Rack Mount option with two Control Units mounted.
q K3: 19” Rack Mount option with one Control Unit mounted and a
blank cover installed in the second Control Unit location.
q L: Gas selector panel consisting of sample/ref ow meters and
control valves for metering input of sample/calibrations sup-
port gases.
q F: Flame Arrestors for Class 1, Div. 1, Groups C/D service.
q P: Flame Arrestors for Class 1, Div. 1, Groups C/D service, and
Auto Cal valves option (Ref. C above) and GP use.
q Q: Flame Arrestors for Group B (hydrogen) service, and Auto Cal
valves option (Ref. C above)
q O: Flame Arrestors for Group B (hydrogen)
q R: Sealed Reference Cell