User guide

Teledyne Analytical Instruments
1-2 Part
1 Introduction Model 2010A
1.2 Typical Applications
A few typical applications of the Model 2010A are:
Power generation
Air liquefaction
Chemical reaction monitoring
Steel manufacturing and heat treating
Petrochemical process control
Quality assurance
Refrigeration and storage
Gas proportioning control.
1.3 Main Features of the Analyzer
The main features of the Model 2010A Thermal Conductivity Ana-
lyzer include:
• Threeindependent,userdenable,analysisrangesallowupto
three different gas applications with one concentration range
each, or up to three concentration ranges for a single gas appli-
cation,oranycombination.
• Specialrecalibrationrangeformultipleapplications.Recalibrat-
ingone,recalibratesall.
Automatic, independent linearization for each range.
Auto Ranging allows analyzer to automatically select the proper
preset range for a given single application. Manual override al-
lowstheusertolockontoaspecicrangeofinterest.
RS-232 serial digital port for use with a computer or other digi-
tal communications device.
• Sixadjustableconcentrationsetpointswithtwoalarmsanda
system failure alarm relay.
Extensive self-diagnostic testing, at startup and on demand.
• A2-linealphanumericdisplayscreen,drivenbymicroprocessor
electronics, that continuously prompts and informs the operator.
High resolution, accurate indication of target or impurity gas
concentrationfromlarge,bright,meterreadout.(0-9999ppm
through0-100%dependingontypesofgasinvolved.)
Standard, proven sensor cell design.
Wide range of custom applications, ranges, and linearization.