Datasheet

10
SPECIFICATIONS
WaveSurfer 3022 WaveSurfer 3024 WaveSurfer 3034 WaveSurfer 3054 WaveSurfer 3074
Analog - Vertical
Bandwidth (@ 50Ω) 200 MHz 350 MHz 500 MHz 750 MHz
Rise time 1.75 ns typical 1 ns typical 800 ps typical 550 ps typical
Input Channels 2 4
Vertical Resolution 8-bits
Sensitivity 50 Ω: 1mV/div - 1 V/div; 1 MΩ: 1 mV/div - 10 V/div
DC Gain Accuracy ±(1.5%) Full Scale, Offset at 0V, > 5mV/div; ±(2.5%) < 5 mV/div
BW Limit 20 MHz 20 MHz, 200 MHz
Maximum Input Voltage 50 Ω: 5 Vrms, ±10 V Peak; 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz)
Input Coupling 50 Ω: DC, GND; 1 MΩ: AC, DC, GND
Input Impedance 50 Ω ±2.0%, 1 MΩ ±2.0% || 16 pF
Offset Range 50 Ω: 1 mV - 19.8 mV: ±2 V, 20 mV - 100 mV: ±5 V, 102 mV - 198 mV: ±20 V, 200 mV - 1 V: ±50 V
1 MΩ: 1 mV - 19.8 mV: ±2 V, 20 mV - 100 mV: ±5 V, 102 mV - 198 mV: ±20 V, 200 mV - 1 V: ±50 V,
1.02 V - 1.98 V: ±200 V, 2 V - 10 V: ±400 V
Offset Accuracy ±(1.0% of offset value + 1.5%FS + 1 mV)
Analog - Acquisition
Sample Rate (Single-shot) 2 GS/s (4 GS/s interleaved)
Sample Rate (Repetitive) 50 GS/s
Record Length 10 Mpts/ch (all channels)
Acquisition Modes Real Time, Roll, RIS (Random Interleaved Sampling),
Sequence (Segmented Memory up to 1,000 segments with 1μs minimum intersegment time)
Real Time Timebase Range 2 ns/div - 50 s/div 1 ns/div - 50 s/div
RIS Mode Timebase Range 2 ns/div - 10 ns/div 1 ns/div - 10 ns/div
Roll Mode Timebase Range Up to 50 s/div (roll mode is user selectable at ≥ 100 ms/div)
Timebase Accuracy ±10 ppm measured over > 1ms interval
Digital - Vertical and Acquisition (WS3K-MSO Option Only)
Input Channels 16 Digital Channels
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL(+1.4V), 5V CMOS (+2.5V), ECL (-1.3V) or User Dened
Maximum Input Voltage ±30V Peak
Threshold Accuracy ±(3% of threshold setting + 100mV)
Input Dynamic Range ±20V
Minimum Input Voltage Swing 500mVpp
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Maximum Input Frequency 125 MHz
Sample Rate 500 MS/s
Record Length 10MS - 16 Channels
Minimum Detectable Pulse Width 4 ns
Channel-to-Channel Skew ± (1 digital sample interval)
User dened threshold range ±10V in 20mV steps
Trigger System
Modes Auto, Normal, Single, Stop
Sources Any input channel, External, Ext/5, or line; slope and level unique to each source (except for line trigger)
Coupling DC, AC, HFREJ, LFREJ
Pre-trigger Delay 0-100% of full scale
Post-trigger Delay 0-10,000 Divisions
Hold-off 10ns up to 20s or 1 to 100,000,000 events
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±610mV, Ext/5: ±3.05V
Trigger Types Edge, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV - 720p, 1080i, 1080p), Runt, Slew Rate,
Interval (Signal or Pattern), Dropout, Qualied (State or Edge); External and Ext/5 support edge trigger only.
Measure, Zoom and Math Tools
Measurement Parameters Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base, Delay,
Duty Cycle, Fall Time (90%–10%), Fall Time (80%–20%), Frequency, Maximum, Mean, Minimum, Overshoot+,
Overshoot-, Peak-Peak, Period, Phase, Rise Time (10%–90%), Rise Time (20%–80%), RMS, Skew, Standard
Deviation, Top, Width+, Width-. Statistics and histicons can be added to measurements. Measurements can be gated.
Zooming Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.
Math Functions Up to 2 of the following functions can be calculated at one time: Sum, Difference, Product, Ratio, Absolute Value, Aver-
age, Derivative, Envelope, Floor, Integral, Invert, Reciprocal, Rescale, Roof, SinX/x, Square, Square Root, Trend, Zoom
and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and FlatTop windows).
Probes
Standard Probes One PP019 (5mm) per channel One PP020 (5mm) per channel
Probing System BNC and Teledyne LeCroy ProBus for Active voltage, current and differential probes