Datasheet

15
SPECIFICATIONS
WaveSurfer 510
Vertical System
Analog Bandwidth @ 50 Ω (-3 dB) 1 GHz (≥ 2 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) 500 MHz (typical)
Rise Time (10–90%, 50 Ω) 415 ps (typical)
Input Channels 4
Vertical Resolution 8-bits; up to 11-bits with enhanced resolution (ERES)
Sensitivity 50 Ω: 1 mV/div–1 V/div, fully variable; 1 MΩ: 1 mV/div–10 V/div, fully variable
DC Vertical Gain Accuracy
(Gain Component of DC Accuracy)
±1% F.S. (typical), offset at 0 V
Channel-Channel Isolation DC up to rated BW: 40 dB (>100:1), (For any two ProBus input channels, same v/div settings, typical)
Offset Range 50 Ω:
±1.6 V @ 1 mV– 4.95 mV/div, ±4 V @ 5 mV–9.9 mV/div,
±8 V @ 10 mV–19.8 mV/div, ±10 V @ 20 mV–1 V/div
1 MΩ:
±1.6 V @ 1 mV–4.95 mV/div, ±4 V @ 5 mV–9.9 mV/div,
±8 V @ 10 mV–19.8 mV/div, ±16 V @ 20 mV–100 mV/div,
±80 V @ 102 mV–1.0 V/div, ±160 V @ 1.02 V–10 V/div
DC Vertical Offset Accuracy ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit)
Maximum Input Voltage 50 Ω: 5 V
rms
±10 V peak; 1 MΩ: 400 V max. (DC + peak AC < 10 kHz)
Input Coupling 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Input Impedance 50 Ω ±2% or 1 MΩ || 17pF, 10 MΩ || 9.5 pF with supplied Probe
Bandwidth Limiters 20 MHz, 200 MHz
Horizontal System
Timebases Internal timebase common to 4 input channels; an external clock may be applied at the EXT input
Acquisition Modes Real-time, Roll, Random Interleaved Sampling (RIS), Sequence
Time/Division Range 200 ps/div - 1000 s/div
RIS available at ≤ 10 ns/div;
Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy ≤ 1.5 ppm +(aging of 0.5 ppm/yr from last calibration)
Sample Clock Jitter Up to 10μs Acquired Time Range: 100fsrms (Internal Timebase Reference)
Up to 10ms Acquired Time Range: 360fsrms (Internal Timebase Reference)
Delta Time Measurement Accuracy
+
(Sample Clock Jitter)
2
(RMS, seconds, TIE)
Noise
SlewRate
+
(Sample Clock Jitter)
2
(RMS) + (clock accuracy
*
reading) (seconds)
2
2
*
Noise
SlewRate
2
Jitter Measurement Floor
+
(Sample Clock Jitter)
2
(RMS, seconds, TIE)
Noise
SlewRate
+
(Sample Clock Jitter)
2
(RMS) + (clock accuracy
*
reading) (seconds)
2
2
*
Noise
SlewRate
2
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
Acquisition System
Sample Rate (Single-Shot) 10 GS/s on 4 Ch
Sample Rate (Repetitive) 50 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Memory Length
(# of Segments in Sequence Mode)
16 Mpts/ch for all channels, 32 Mpts (interleaved) (5,000 segments)
Intersegment Time 1 μs
Averaging Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or Sin x/x